Because of its high hardness and durable performance, aluminum profiles are widely used in Dongguan aluminum profiles. There are many types of aluminum profiles on the market. Different types of aluminum profiles have different values in use. Of course, aluminum profiles are The use of the process to play an ideal role, this need to be established under the premise of a reasonable installation, the following describes the aluminum installation method.

1. Install the rack

Rack mounting is the basic work during the installation of aluminum profiles in Dongguan, because the profile needs to be fixed at a certain point, and the fixing of this point needs to have a fulcrum. The rack is used to fix the corresponding rack, but according to different types of profiles With correspondingly different racks, you can't ignore the model's corresponding problems in rack selection. If the rack selection is not appropriate, it will directly affect the subsequent use of the entire aluminum profile. It is more troublesome.

2. Adjust the installation form

One thing that needs to be done after the rack is installed is the commissioning work. In this process, the slot of the adjustment plate needs to be stuck in the T-shaped structure, and the corresponding effect must be paid attention. In addition, the bolts on both sides of the profile must also be tightened. To avoid loosening during use;

3. Install the timing belt

In the installation process of the aluminum profile, the timing belt is required to play a stabilizing role. Therefore, two holes need to be drilled at the two ends of the profile, and the holes are connected to each other and play a fixed role.